SHCM-S96R

Outstanding Features

• Ruggedly built turret type milling head.
• The spindle is one piece machined from SCM-21 alloy steel, carburized, tempered and precision ground. The spindle runs on high precision P4 class bearing.
• Fitted with forced lubrication system for gears, clutch, and bearings inside the milling head for low noise running and long service life of head parts.
• The milling head can be swivelled 45° to the right and left. It is quickly locked and loosened by double screws and clamping ring.
• Constructed of high quality castings FC-30 and Fcd-35, rib reinforced, tempered, and stress relieved for maximum rigidity without deformation.
• The table is manufactured from high quality cast iron FC-30. The table surface and slideways are tempered, high frequency hardened, and precision ground. The T-slots are precision machined. The 6 surfaces on 3 T-slots are precision ground to within 0.01mm accuracy in full way, permitting for fast milling operations.
• The X, Y axis feeds are driven by high precision C5 class preloaded double nut ball screws with tightening function, providing smooth feed, minimum backlash, and superior positioning accuracy.
• The X-axis feed is driven by a 1000W AC servo motor and the original driver, incorporated with a magnetic clutch for safe, powerful, fast, stable and quiet traverse. Automatic feed speed range is 0 – 1500 mm/min. Rapid feed speed as high as 3500mm/min.
• An installation space is left for a Y-axis servo motor, providing convenient fitting at any time (OPTIONAL EQUIPMENT)
• The X, Y axis slideways, dovetailed surfaces and gibs are coated with Turcite-B, precision scraped for long term accuracy and maximum wear resistance.
• Precision chip wipers protect the x, Y and Z axis ways for scratch free traverse.
• The digitally displayed, timer controlled lubricator provides automatic lubrication to the X, Y, Z axis slideways, feed screws, gears and bearings.
• The oil supply time and lubrication interval can be set. An oil manifold ensures uniform lubrication to the parts.
• Using a rough milling cutter (diameter 40mm, cutting depth 70mm, heavy cutting material S45C), the coin will not fall when it stands on the surface of the workpiece.